(26)PRELOAD SPACER WASHERS / SOLD 4 EACH***OUT OF STOCK***

Some have asked "Where are the washers that go between the spacer and the spring?".

The washers are only needed if you have plastic/PVC spacers.

If you have metal spacers then you do not need them.

If you want to get into the metal spacers then buy a piece of 1" id tubing and cut it to match the length of your existing spacers. If you want your front end to be a little tighter and less sloppy feeling then add 3/4" - 1" length to the new spacers and use a 30wt oil instead of 20wt. And if you really want better handling then get into a set of Progressive springs along with the upgrades above.