These are a direct replacement for all Big Dog Front Signal Lights 04 & up.
These are the high intensity version so if you have the stock units you will likely want to replace both lights at the same time.
These are sold as each not as a pair so if you want two then order 2.
WSW Urethane seals the back of the boards to prevent corrosion, we reinforce the wiring base to prevent vibration from breaking the solder joints, we keep the wires short to prevent excess wire from pushing against the housing causing chaffing and grounding out and we use double wall adhesive lined shrink tube at the connector to isolate the wires from each other and provide a more solid connection
.
This product was added to our catalog on Monday 02 March, 2015.